The Ultra Beast G2 - 1800W Nanuk 910

The Ultra Beast G2 is a QOL update to our much beloved Ultra Beast charge case.  This update brings a cleaner look, improved thermals, and a switched AC inlet.

The Ultra Beast G2 is a compact monster of a charge case, with four charging channels capable of delivering nearly 2000W of charging power, while taking up little more space on your table than a transmitter case.

Full Features/Specs:

Nanuk 910 Hard Case, IP67 Waterproof + Dustproof
Nanuk Hard Cases are renowned for being extremely robust, resistant to wear and tear, and long lasting, and with the built-in screw holes, they are extremely well suited to being used for charge cases.  We do not put any holes, slots, or otherwise ingress points into the case itself, ensuring it retains the IP67 rating it has from the factory.

Optimized for High Power Density (Small Case, Big Power)
We pack as much power as we reasonably can into our charge cases.  By utilizing the interior lid space with a unique 3D printed riser-style deck instead of having a simple flat panel deck, we can squeeze bigger power supplies and bigger chargers into our cases.  The main tradeoff is the lack of storage space - you will need to find somewhere else to put your power cord and charge leads.  For most people, this is only a mild tradeoff, as we already bring other tool/field boxes to the field anyway.

Reliable DC Power
The Ultra Beast G2 utilizes a Mean Well RSP-2000-24 power supply, an absolute power density monster.  Mean Well is known for their reliable and efficient power supplies and this one is no exception.*

Dual ISDT P20 Dual Channel Smart Chargers
The Ultra Beast G2 is packed with two of ISDT's beloved P20 dual channel chargers, each capable of delivering nearly 1000W of charging power at up to 8s LiPo.  This gives you four independent charging channels, making quick work of large numbers of batteries.

Temperature Controlled Server Grade Case Fans for Efficient & Reliable Cooling
The Ultra Beast G2 uses high end 60mm ball bearing fans controlled by a smart temperature controller to reduce noise when under lighter loads.

XT60 Output Connectors for Simplified Charging
The Ultra Beast G2 uses XT60 output connectors for all channels and the auxiliary output.  Say goodbye to wear-prone, bulky, and dangerous banana jacks.

XT60 Auxiliary Power Port for Powering External Devices
The Ultra Beast G2 features an XT60 output port, connected directly to the internal power supply, allowing you to connect to other devices, such as our Vbar Control Fast Charger or our Companion G2 or other external DC devices.

USB Outputs for Charging Devices at the Field
The Ultra Beast G2 features a USB charger module allowing you to charge your phone, GoPro, or other USB device at the field.

This product includes:
1 x Fully Assembled Charge Case
1 x Right Angle IEC Input Cable 

This charge case is at the limit of what is possible in terms of power density, so it is loud due to the high power fans used to cool it.  The temperature controlled fans make it more manageable vs them running full speed all the time, but it's likely not a charge case you want to charge with indoors, especially at high power levels.

*Note that when running on 120VAC, the PSU is limited to around 1700W.  This corresponds to about 60A total combined current on all four channels on 6s.  You will not be able to safely/reliably max out the case unless you are running 240VAC input. 

Be aware that because every case is made to order and often customized in several ways, the photos may not perfectly reflect what you get, including not only colors but USB module versions, different inlet styles, and different availability of various components.  

We do not keep stock of cases nor components.  Due to the low order volume of charge cases, each case is built individually to order.  This allows easy customization requests and changes to the case design.  Due to the MTO nature of charge cases, there can be up to a 1 month lead time before shipping after you place your order, especially with more complex customizations like component substitutions.  There is a $200 order cancellation fee if you decide you do not want the case after your order is placed.  NO EXCEPTIONS