This is a great way to keep your receiver antennas in check. Designed to be mounted to a flat surface using double sided tape and sends the antennas up vertically at a 90 degree angle to each other for optimal reception. Perfect for use on Goblin helicopters mounted to the rear cyclic servo but of course can be used on any helicopter or airplane where you want vertically oriented antennas.

Can be used with or without 3mm OD antenna tubes. Note that the antenna tubes are NOT included with this item. They can be found easily on Amazon for cents. If you intend to use antenna tubes, you may need to ream out the holes slightly depending on which tubes you get. The diameter of these tubes is very inconsistent from batch to batch and brand to brand, so the holes are intentionally undersized so you can make them fit properly. Remember that you can always take away material, but you can't put it back! Ream the holes slowly until the tube goes in with a nice snug fit. If you accidentally make the holes too loose, you can always use some CA glue to hold them in.

This product includes:
2 x Vertical Flat Mount Antenna Guide (ABS Plastic)

This product is made to order, so processing time before shipping can be as high as 1 week.

Download .STL here:
https://cults3d.com/en/3d-model/gadget/vertical-flat-mount-antenna-guide