Sullivan Hi-Tork 3s LiPo Battery Holder

This battery holder solution offers an easy way to connect and use a small 3s LiPo with your Sullivan Hi-Tork starter.  Designed around 3s 1300-1500mAh size class LiPos.  The threaded end-cap can be customized as needed to accommodate much longer packs, such as 3s 2200, though the default configuration should work for the most common 1300-1500mAh packs.  Contact us for longer end-cap options.

Wago 221-412 wire splicing terminals make it easy to connect your Dynatron's input leads to the adapter and get flying with no soldering required.  All you have to do is cut and strip the wires from your starter motor and switch, connect the harness, and put it all together.  The included cable comes with a male XT60 for connecting LiPos.  Use an adapter or cut off and solder on your own connector if you do not use XT60.

This product includes:
1 x 3D Printed Sullivan Hi-Tork LiPo Battery Holder (Black ABS Plastic)
1 x XT60 to Wago 221 Cable

This product has a limited lifetime warranty.  If the 3D printed pieces break due to impact damage, let us know and we'll get a new one sent out to you.  The warranty does not cover melted or damaged wiring or terminal due to extended periods of too high amp draw (e.g. stalling the starter motor for too long).  

LiPo Battery, Charger, and Hi-Tork starter not included. 

Shipping Disclaimer:
In an effort to reduce waste of shipping supplies, if you order only a starter adapter, it will ship in the single box that it is packaged in instead of being double boxed.  Any additional small items ordered, if they can fit into the adapter box itself that is how it will ship.  If your order is too much to fit into the starter adapter box, then it will be double boxed.

This product is always made to order, so lead-time before shipment may be as long as a week.