"The Mini Beast" - 1000W Nanuk 909

Are you ready for this ultra compact and sleek powerhouse of a charge case?  Measuring just over 12"/30cm lengthwise and only about 4"/10cm thick when closed, and outputting a maximum of 1kW of charging power, the Mini Beast charge case will keep your packs charged up while taking up minimal travel and workbench space.

Features:
-Nanuk 909 Case, Extremely Rugged and Locks Tightly.  

-Two ISDT Air 8 500W Chargers, totaling up to 1000W (2 x 6s @ 20A) of charging capability. ISDT chargers shipped with our cases are always updated to the latest firmware prior to case assembly and shipment.  Any future updates to the firmware must be applied by the user and will involve disassembly of the charge case.

-Two Mean Well UHP 500W 24V Power Supplies for Reliable, Clean Power.  Each charger is independently powered by its own power supply.  In the unlikely event of a power supply failure, you will not be left in the dust with a useless case until you're able to attain a replacement power supply.  The power supplies are tuned up to a slightly higher voltage than default, usually 26-28V, to provide a slightly higher efficiency when charging 6s LiPos.

-High Airflow Ball Bearing 24V Fans for Reliable Cooling. 

-Two-Piece ABS 3D Printed Deck that will hold up to the summer heat.

-XT60 Outputs for Simplified Charging (no more unreliable and wear prone banana plugs)

-XT60 Auxiliary Output* 

-Dual USB QC3.0 Outputs** for charging your phone or other USB device at the field. 

This product includes:
1 x Fully Assembled Charge Case
1 x Right Angle IEC Input Cable 

*Auxiliary power output is connected to the right channel power supply.  You must keep total power draw at or below 500W between the right channel charger and external device (e.g. 250W from the charger and 250W load on the auxiliary output).  Attempting to pull more than 500W total on the right side may result in overheat and/or shutdown of the power supply.   The auxiliary output will output the same voltage as the power supply.

**May be substituted for dual QC3.0 + USB C PD at our discretion depending on availability.

Be aware that because every case is made to order and often customized in several ways, the photos may not perfectly reflect what you get, including not only colors but USB module versions, different inlet styles, and different availability of various components.  

Color customizations are available.  If you do not provide any customization requests either by email or order special instructions, the assumed configuration will be "Blackout", with a black case, black bezel, black deck, black fan grill, etc.  All of these colors can be customized, however.  Available colors for the case depends on availability from our suppliers, contact us for info on availability.  Available colors for printed parts are as follows:

Black
Graphite
Gray
White
Red
Orange
Yellow
Green
Lime Green
Blue
Light Blue
Purple
Hot Pink

You can also choose to exclude the USB output module, or choose a different style (must be 30mm diameter) if you find one you like better.  On cases that have it, you can also choose to exclude the auxiliary power output. 

We do not keep stock of cases nor components.  Due to the low order volume of charge cases, each case is built individually to order.  This allows easy customization requests and changes to the case design.  Due to the MTO nature of charge cases, there can be up to a 1 month lead time before shipping after you place your order, especially with more complex customizations like component substitutions.  There is a $200 order cancellation fee if you decide you do not want the case after your order is placed.  NO EXCEPTIONS.