"The Companion" - 200W Nanuk 904

Measuring just over 10" wide and 5" thick, and outputting a maximum of 200W on both AC and DC, the Companion is perfect for those who don't need a huge amount of power and want to charge using either AC or DC power.  Use it as your main charge case on AC or DC, or syphon off power from your larger charge case's auxiliary power output to power the Companion in DC mode.  This case can also be made without the switch and convert the XT60 to an auxiliary output.

Features:
-Nanuk 904 Case, Extremely Rugged and Locks Tightly.

-ISDT Q6 Nano 200W Charger, with up to 200W (6s @ 8A) of charging capability. ISDT chargers shipped with our cases are always updated to the latest firmware prior to case assembly and shipment.  Any future updates to the firmware must be applied by the user and will involve disassembly of the charge case.

-Mornsun 200W 24V Power Supply for Reliable, Clean Power.  The power supply is tuned up to a slightly higher voltage than default, usually 26-28V, to provide a slightly higher efficiency when charging 6s LiPos.  Note:  For 240V operation, you must toggle the voltage selector switch on the power supply.

-3-Position Toggle Switch for changing between AC and DC power and for turning off the case without unplugging it.

-High Airflow Ball Bearing Fan for Reliable Cooling.

-ABS 3D Printed Deck that will hold up to the summer heat.  

-XT60 Output for Simplified Charging (no more unreliable and wear prone banana plugs)

-XT60 Input for DC operation.  Suggested input voltage 24-30V.  Less than 23V input will reduce the charger's output capability due to input current limiting.

This product includes:
1 x Fully Assembled Charge Case
1 x Right Angle IEC Input Cable

Be aware that because every case is made to order and often customized in several ways, the photos may not perfectly reflect what you get, including not only colors but USB module versions, different inlet styles, and different availability of various components.  

Color customizations are available.  If you do not provide any customization requests either by email or order special instructions, the assumed configuration will be "Blackout", with a black case, black bezel, black deck, black fan grill, etc.  All of these colors can be customized, however.  Available colors for the case depends on availability from our suppliers, contact us for info on availability.  Available colors for printed parts are as follows:

Black
Graphite
Gray
White
Red
Orange
Yellow
Green
Lime Green
Blue
Light Blue
Purple
Hot Pink

We do not keep stock of cases nor components.  Due to the low order volume of charge cases, each case is built individually to order.  This allows easy customization requests and changes to the case design.  Due to the MTO nature of charge cases, there can be up to a 1 month lead time before shipping after you place your order, especially with more complex customizations like component substitutions.  There is a $200 order cancellation fee if you decide you do not want the case after your order is placed.  NO EXCEPTIONS.