2s 1000mAh LiPo Mount with Integrated XT60 Connector

New! Now includes hex head screws for superior drive torque and no more stripping screws.  Use 1.5mm hex driver to install included screws.

An easy way to secure your receiver pack to your airplane and make the connection without loose cables.  Available in many different colors and more predetermined sizes will be added over time.  Printed in strong, temperature resistant ABS plastic.

Product includes four M2x10mm self-tapping screws, a modified XT60E-M connector, and a pre-sized Velcro-brand hook and loop tape strap.  You must supply your own hook and loop adhesive-backed tape for the main battery attachment.  Each tray is sized roughly for typical size and shaped packs of their size class (e.g. 2s 1000mAh).  Since the tray does not entirely surround the pack, there is some leeway for pack sizing.  If in doubt, contact us with the dimensions of the pack you want to use and we'll double check fitment.  If your pack size is not currently available, contact us for a custom sized mount for no extra charge.  

To use, unscrew the XT60E-M from the mount using a 1.5mm hex driver and push it out through the bottom.  Run a pair of wires (usually 14-18awg) through the end hole in the mount, then solder them to the XT60E-M.  Push the connector back into its hole and screw it back in.  Connect the other end of the wires to your receiver, BEC, ECU, ESC, etc.

Note:
EC3 and IC3 battery-side (female) connectors will plug into the integrated XT60E-M connector.

This product is always made to order, so lead-time before shipment may be as long as a week.