KC3D LLC
"The Junk Drawer" - 1000W Nanuk 910 w/ Storage
"The Junk Drawer" - 1000W Nanuk 910 w/ Storage
Similar to our popular 1000W Nanuk 909 High Density Charge Case, this one takes a different approach. While taking up only a little more space than the 909 cases, this case has a magnetic hatch and storage compartment, in which you can store anything from power and charge leads to smaller LiPos, tools, and more, while boasting the same 1000W output power with two ISDT Q8 500W chargers.
Features:
-Nanuk 910 Case, Extremely Rugged and Locks Tightly.
-Two ISDT Air 8 500W Chargers, totaling up to 1000W (2 x 6s @ 20A) of charging capability. ISDT chargers shipped with our cases are always updated to the latest firmware prior to case assembly and shipment. Any future updates to the firmware must be applied by the user and will involve disassembly of the charge case.
-Mean Well LRS-1000 24V Power Supply for Reliable, Clean Power.
-High Airflow Ball Bearing 24V Fans for Reliable Cooling.
-Two-Piece ABS 3D Printed Deck that will hold up to the summer heat.
-In-Deck Storage Compartment for storing charge leads, tools, batteries, and more. Compartment dimensions approximately 130x180x37mm.
-XT60 Outputs for Simplified Charging (no more unreliable and wear prone banana plugs)
-XT60 Auxiliary 24V Output*
-Dual USB QC3.0 Outputs** for charging your phone or other USB device at the field.
This product includes:
1 x Fully Assembled Charge Case
1 x Right Angle IEC Input Cable
*Auxiliary power pulls from the main power supply, so be sure not to exceed the maximum rating when charging with the case and powering an external load. The auxiliary output will output the same voltage as the power supply, usually 26-28V.
**May be substituted for dual QC3.0 + USB C PD at our discretion depending on availability.
Be aware that because every case is made to order and often customized in several ways, the photos may not perfectly reflect what you get, including not only colors but USB module versions, different inlet styles, and different availability of various components.
Color customizations are available. If you do not provide any customization requests either by email or order notes, the assumed configuration will be "Blackout", with a black case, black bezel, black deck, black fan grill, etc. All of these colors can be customized, however. Available colors for the case depends on availability from our suppliers, contact us for info on availability. Available colors for printed parts are as follows:
Black
Graphite
Gray
White
Red
Orange
Yellow
Green
Lime Green
Blue
Light Blue
Purple
Hot Pink
You can also choose to exclude the USB adapters, or choose a different style (must be 30mm diameter). On cases that have it, you can also choose to exclude the auxiliary power output.
There is a $200 order cancellation fee if you decide you do not want the case after it has been ordered. NO EXCEPTIONS.
Share
Awesome
Many charging options out there. Ordering from KC3D JUNK DRAWER was the best decision I’ve made. Glad I waited. Keith is on point from start to finish.