Heavy duty 3D printed pushrod guides for the MSH Protos Nitro and the MSH 700-800 Evoluzione. They are flexible and can be opened fully, meaning you don't need to pull the tail box off in order to install/remove them, and they clamp tight, so you can be sure you won't have issues with them rotating in flight.
This product includes:
1 x Tail Pushrod Guide (Black ABS Plastic)
1 x M2x14 Socket Head Cap Screw
1 x M2 Nut
Ideal install location is 27cm from the tail box. This assumes you're using the stock carbon fiber tail boom. It will likely not be tight enough on the aluminum MSH 700 boom without a layer of tape. On the tapered CF booms, if it's too loose simply slide it slightly further forward.
This product is made to order, so processing time before shipping can be as high as 1 week.