"The Baby Beast" - 400W Nanuk 904
"The Baby Beast" - 400W Nanuk 904
Measuring only just over 10" wide and 5" thick, and outputting a maximum of 200W per channel (400W total), the Baby Beast is perfect for those who don't need a huge amount of power but want to charge smaller batteries quickly... and yet still easily charge a set of 6s 5000s at over 1.5C when needed.
-Nanuk 904 Case, Extremely Rugged and Locks Tightly.
-Two ISDT Q6 Nano 200W Chargers, totaling up to 400W (2 x 6s @ 8A) of charging capability. ISDT chargers shipped with our cases are always updated to the latest firmware prior to case assembly and shipment. Any future updates to the firmware must be applied by the user and will involve disassembly of the charge case.
-Two Mean Well UHP 200W 24V Power Supplies for Reliable, Clean Power. Each charger is independently powered by its own power supply. In the unlikely event of a power supply failure, you will not be left in the dust with a useless case until you're able to attain a replacement power supply. The power supplies are tuned up to a slightly higher voltage than default, usually 26-28V, to provide a slightly higher efficiency when charging 6s LiPos.
-High Airflow Ball Bearing Fans for Reliable Cooling.
-Two-Piece ABS 3D Printed Deck that will hold up to the summer heat.
-XT60 Outputs for Simplified Charging (no more unreliable and wear prone banana plugs)
-Dual USB QC3.0 Outputs* for charging your phone or other USB device at the field.
This product includes:
1 x Fully Assembled Charge Case
1 x Left Angle IEC Input Cable
*May be substituted for dual QC3.0 + USB C PD at our discretion depending on availability.
Be aware that because every case is made to order and often customized in several ways, the photos may not perfectly reflect what you get, including not only colors but USB module versions, different inlet styles, and different availability of various components.
Color customizations are available. If you do not provide any customization requests either by email or order notes, the assumed configuration will be "Blackout", with a black case, black bezel, black deck, black fan grill, etc. All of these colors can be customized, however. Available colors for the case depends on availability from our suppliers, contact us for info on availability. Available colors for printed parts are as follows:
You can also choose to exclude the USB output module, or choose a different style (must be 30mm diameter) if you find one you like better. On cases that have it, you can also choose to exclude the auxiliary power output.
We do not keep stock of cases nor components. Due to the low order volume of charge cases, each case is built individually to order. This allows easy customization requests and changes to the case design. Due to the MTO nature of charge cases, there can be up to a 1 month lead time before shipping after you place your order, especially with more complex customizations like component substitutions. There is a $200 order cancellation fee if you decide you do not want the case after your order is placed. NO EXCEPTIONS.
Great charge case. Very well built, and very compact.
Very pleased. Have used 3 times. Thanks Keith. KC
After many attempts I have what I wanted
It is very small - about the size of a TX case (at least my vbar one).
It is very light - 4 pounds!
It will charge two 6s 6000mah batteries at 1C (6 amps each) even being that small!
Fits my needs exactly!
I have extensively used this charger for the last serveral months an it is built incredible well, perfect for anyone who likes to keep there setup lightweight and compact. I fly mostly 550 size helis or smaller.