This ESC mount provides a way to securely mount a Scorpion Tribunus II 14-200 ESC to any helicopter that uses the 98x40mm HobbyWing mounting pattern. It screws in from the bottom of the tray using heatset inserts in the mount, eliminating the need for fiddling with locknuts on the underside of the ESC tray.

Features:

Extremely secure ESC mounting with no zip ties or double sided tape
Helps protect ESC casing, capacitors, and throttle/gov connectors from impacts
Screw-together design for simple installation
Adds minimal weight
Zip tie locations for clean cable routing

This product includes:
1 x Bottom Mount Piece (ABS Plastic)
1 x Top Cap (ABS Plastic)
2 x M3x25 FHCS
4 x M3x6 SHCS

Note: Due to slight variations in ESC trays, you may find that you need to enlarge the mounting holes in your tray slightly. You can use a 1/8" or 3.5mm drill bit to do so. You may need to use a hex key or ball end hex driver to install, depending on the helicopter.