Buy it here:
https://kc3dprint.com/products/200w-nanuk-904
White colored things that are not naturally white, be it filament, non-printed plastics, putties, paints, makeup, and even food, is pigmented using Titanium Dioxide. It's one of the few truly white pigments one can get, others are much less common and generally don't look as good as TiO2.
In 3D printing filament in particular, and most plastics, it takes a significant amount of the compound (which in its natural form is a powder) to create a true deep white color, and mixing large amounts of a dry compound into filament has its downsides. White filament tends to be quite brittle, and is extremely difficult to tune in due to the large amount of non-plastic that is flowing through the extruder. Prints in white filament (in our case, ABS) tend to not come out as pretty as just about any other color. There are usually more defects and artifacts, and even when printed at the perfect temperature is still typically quite brittle compared to other colors.
This is, unfortunately, something that is hard to avoid when it comes to white filament. It can be mitigated to some extent with extreme fine tuning, but is not totally avoidable.
]]>If you do want it done in a different color, just ask. Either in your order notes, or send a message via the contact form with your order number. Plenty of colors are available. To get the most recent update on available colors, you can go to the product page for an antenna guide and look at the color options there. If you don't see the color you want, send a message via the contact form, and I can probably get it.
The only thing about custom colors is that, naturally, they will add some time to the order because I'll have to reprint the parts. I have no issue with doing this, so if you do want a different color, it's no problem.
This also goes for most products I sell. Just ask!
]]>
Happy new year everyone!
]]>https://kc3dprint.com/collections/repair-services
]]>We do not get dealer or lower pricing on any of the components used in our cases. Everything we buy to build your case is at the same cost as you would pay, if not more because we usually pay for faster shipping to get the cases built faster. We are not building these cases to make a huge profit, but doing it at a loss would be silly. We hope you understand.
]]>Home Depot "Ridgid" 18V Battery Adapter
https://kc3dprint.com/products/sullivan-ridgid
3-6s End-Cap Style Battery Holder
https://kc3dprint.com/products/sullivan-3-6s
]]>